12V-24V Pulse Signal Cycle Delay Timer Switch dual MOS Control Board
Features: _x000D_ 16 opto isolated digital inputs,3 opto isolated digital outputs; _x000D_ Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version; _x000D_ Analog spindle control 0-10V spindle control (can be modified as PWM output); _x000D_ Interface clear and simple, powerful, almost meet all requirements _x000D_ There is a key emergency STOP function (STOP key), with reverse connection protection, reverse connection does not burn _x000D_ Added sleep mode, after enabling, 5 minutes without any operation, automatically close the display, any button to wake up _x000D_ Different OP, CL and LOP parameters can be set, which are independent and saved separately _x000D_ Set parameters for automatic power off and save _x000D_ With optocoupler isolation, enhance anti-interference ability, industrial level circuit board, set parameters after power off forever memory _x000D_ _x000D_ _x000D_ Specification: _x000D_ 2: Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system's anti-jamming capability (customers can also shorting common ground). _x000D_ Output capacity: 5V--36V DC, 15A continuous current at room temperature, 400W power (maximum current up to 30A under auxiliary cooling conditions) _x000D_ Service life: infinite times switch _x000D_ Working temperature: - 40~85 _x000D_ Weight: Approx.16g/0.6oz_x000D_ _x000D_ Operating mode:_x000D_ P1: trigger signal, the relay is on "OP" time, and then disconnect; in the "OP" time, as follows:_x000D_ P1.1: signal is triggered again, invalid_x000D_ P1.2: signal is triggered again, the clock is reset_x000D_ P1.3: Signal trigger again, relay off, stop the clock;_x000D_ P-2: trigger signal, the relay off "CL" of time, the relay on "OP" time, and then disconnect relay;_x000D_ P3.1: trigger signal, the relay is turned on after the "OP" time, the relay off "CL" time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( "LOP ") can be set._x000D_ P3.2: without triggering signal, the relay is on "OP" time, the relay off "CL" time, and has been cycling; frequency ( "LOP") cycle can be set;_x000D_ P-4: signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing "OP" time, the relay is; if another signal during timing, timing is cleared; _x000D_ _x000D_ _x000D_ Pay attention:_x000D_ 1. The module is an active output, the output voltage equal to the input voltage._x000D_ 2.'DC + 'and' load + 'This is an internal short circuit of the poles, but' DC- 'and' load - 'poles during use can not be shorted, otherwise the load can not be controlled on and off, which is equivalent load is been carrying electricity. _x000D_ _x000D_ _x000D_ Timing range:_x000D_ How to choose the time range?_x000D_ After setting the mode selection screen parameter value by a short press "STOP" button to select the time range;_x000D_ XXX. decimal point in the unit place, time range: 1 second to 999 seconds._x000D_ XX. X decimal point in decade place, Timing range: 0.1 seconds to 99.9 seconds_x000D_ X. X. X. decimal full brightness, Timing range: 1 minute to 999 minutes._x000D_ For example, you want to set "OP" is 3.2 seconds, then move the decimal point to decade place, the digital display 03.2_x000D_ Parameter description: "OP" - conduction time, "CL" - off time, "LOP" - the number of cycles (1-999 times, "---" represents infinite loop)._x000D_ These parameters are independent of each other, but is shared by each mode. For example, in P1.1 mode, set the on-time "OP" is 5 seconds, if you switch to P1.2 mode, it's "OP" will be 5 seconds too._x000D_ In the main interface (display 000), short press "SET" button will display "OP" ( "CL", "LOP") and the corresponding time XXX;_x000D_ Some parameters only mode "OP" (such as the mode P1.1, P1.2, P1.3), short press the "SET" key to display only the "OP"and the corresponding time;_x000D_ Some models have parameters "OP", "CL", "LOP" (such as the mode P3.1, P3.2), short press "SET" button will display "OP" and the corresponding time, "CL" and the corresponding time, "LOP" and the corresponding number of times;_x000D_ In the main interface by short press "SET" key to see information about the parameters of the current mode, very convenient! _x000D_ _x000D_ _x000D_ How to set parameters?_x000D_ 1. First, read the instructions to determine the required operating mode._x000D_ 2. The module is powered up, the display at the current work mode (P1.1 default mode), then enter the main interface; press "SET" button for 2 seconds after release to enter mode selection interface; a short time by pressing "UP", "DOWN" key to select the mode (P1.1 ~ P-4)._x000D_ 3. Select the mode (such as P3.2), short press the "SET" button, t
| Brand | Unbranded |
|---|---|
| Product ID | 314466056-701058825 |
| EAN | 8885109514717 |
| SAR29.49 | STANDARD: | Estimated delivery date Tue 28 April 2026 ─ Tue 05 May 2026 |
Product is shipped from China.
Alternative shipping methods can be selected at checkout.
Products are shipped by the individual Fruugo retailers, who are located across Europe and the rest of the world. The delivery times and shipping prices vary depending on the retailer's location, the destination country and the selected delivery method.
Fruugo offers two delivery options: Standard Delivery or Express Delivery. All retailers offer a standard delivery service, and some retailers also offer an express delivery service.
- Standard Delivery – Domestic Standard delivery takes approximately 2-5 business days from dispatch, while an International Standard delivery takes 5-14 business days from dispatch. Normally track and trace and proof of delivery are not available on a standard service.
- Express Delivery – Domestic Express delivery takes approximately 1-2 business days from dispatch, while an International Express delivery takes 3-7 business days from dispatch. Usually track and trace and/or proof of delivery are available on an express service.
Although Fruugo retailers endeavour to deliver within these timescales, please note that the above timescales are estimated and not guaranteed.
The delivery timescales do not include any customs clearing times beyond Fruugo's control.
Please allow additional shipping time for deliveries to exceptional locations that are hard to reach, and also during busy periods such as Christmas.
All carriers deliver during normal business working hours and may require a signature on receipt, so please ensure your order is delivered to an address where someone will be available to accept it.
We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items.
Certain products purchased at Fruugo cannot be returned. They fall in the following categories:
- goods which are clearly personalised or made to your specifications
- goods which are liable to deteriorate rapidly, eg fresh fruit, fresh flowers
- sealed goods which are not suitable for return due to health protection or hygiene reasons, if opened, eg make up, underwear, pierced jewellery
- sealed audio or video recordings or computer software, if opened
- newspapers, periodicals and magazines
Please take reasonable care of the goods whilst in your care. Any goods returned must be in a resaleable condition. They must be unworn/unused with original tags attached and in original packaging. It is your responsibility to ensure that the goods are appropriately packaged to ensure they are not damaged in return transit.
Notifying us of a return
If you wish to return an order, or some of the products included in an order, please notify Fruugo customer care within 14 days of receiving the goods, including the following information:
- your name,
- order number,
- the item(s) you wish to return, and
- optionally a reason for your return: unsatisfied with item, item didn't match description, damaged item, wrong item, or some other reason.
Our customer care will send you specific instructions on how to ship the return package(s) to the retailer(s). Please do not ship the return package before you receive the instructions.
Shipping products back to retailers
Goods must be returned without undue delay and in any event not later than 14 days after notifying us of your cancellation.
If you are returning products to several retailers, you should distribute the products accordingly and send the products to those retailers who shipped them to you initially.
We strongly recommend that you use registered mail (and insure any high-value packages), since neither Fruugo nor the retailer take responsibility for shipments that are lost or damaged during return transportation.
Please ensure you retain a proof of postage receipt so in the unlikely event your parcel goes missing, you will have proof you sent it.
Refunds
You will be refunded within 14 days of the retailer receiving back the goods. We will notify you by e-mail once the products reach the retailer and are accepted for return. Where a retailer has offered to collect the goods, you will be refunded within 14 days of cancelling your contract.
Unless a product or products you wish to return arrived to you damaged or faulty, you are responsible for the return transportation costs.
Providing you are returning all the products from a specific retailer, we will refund the standard shipping costs you paid for the original delivery. If you chose to pay for a non-standard delivery, we will only refund the cost of our least expensive, standard delivery.
Damaged or faulty goods
If you receive a damaged, broken, or defective product, please notify Fruugo customer care as soon as possible. Include at least the following information:
- your name,
- order number,
- name of the damaged product(s), and
- state the nature of the damage with attached photograph
We will generally instruct you to ship the damaged product back to the retailer. As soon as it reaches the retailer, they will send you a replacement product. If the replacement can't be made, or if you wish to cancel the order, you will be refunded in full. You will also be reimbursed for reasonable returns postage costs for damaged or faulty goods once we have received your postage receipt.
If the outer packaging of your order is clearly damaged on arrival, and you are suspecting that the products are damaged as well, you can either reject the delivery or accept the goods and sign for them as damaged. In both instances, please notify Fruugo customer care as soon as possible.
Refusing delivery
If you refuse to accept delivery of all or part of your order (where the products or packaging do not appear to be damaged or defective) you will be responsible for the postage charges. Any fees and charges incurred by the retailer due to a package being refused will be deducted from your merchandise refund.
Please see the compliance information specific to this product outlined below.
The following information is provided by the independent third-party retailer selling this product.
Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.
- 91440300MA5HDL2A4K
- SHEN ZHEN SHI LAI LI ZHU BAO SHI PIN MAO YI YOU XIAN GONG SI
- Room B, 21F, Block A, Jingang Huating, 4009 Baoan Avenue, Yantian Community, Xixiang Street, Baoan District, Shenzhen
- Shenzhen
- CN
- 518102
- [email protected]
- 15625700418
Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.
- 950891051
- MJCM SARL
- 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France
- Paris
- FR
- 75008
- [email protected]
- 0033 767213611