3D Printer Accessories 3D Touch Sensor Auto Leveling Module Printer Accessories
1、Simple. 3Dtouch can be easily applied due to its small size and simple structure. Collecting information and firmware settings will be an easy task as 3dtouch works as an automatic bed leveling sensor as usual. 2、Smart. Self-test: Push the nail operation three times. Alarm: LED light flashes if a problem is found in the self-test or operation. 3、High precision: The standard deviation of the repeatable 3dtouch is about 0.005mm, which is accurate. 4、Innovative electromagnetic, super power saving. In the idle state, while the push is pulled out or retracted, there is no current flowing solenoid valve, the standby current of the whole device is lower than 15ma average. While in the working state, whil 5、Bed width selection: 3D Touch does not use any light, nor close to (inductor / capacitor) sensors. 3D Touch provides high precision through Hall effect control. Therefore, the bed material can be freely chosen.3D-touch is a fully automatic universal 3D printer hot bed leveling probe (automatic leveling probe). Its advantages are simple, compact, high precision and good compatibility. It is compatible with all bed materials, such as glass metal. Wood plastic acrylic and so on.Features:1. Simple. 3Dtouch can be easily applied due to its small size and simple structure. Collecting information and firmware settings will be an easy task as 3dtouch works as an automatic bed leveling sensor as usual.2. Smart. Self-test: Push the nail operation three times. Alarm: LED light flashes if a problem is found in the self-test or operation.3. High precision: The standard deviation of the repeatable 3dtouch is about 0.005mm, which is accurate.4. Innovative electromagnetic, super power saving. In the idle state, while the push is pulled out or retracted, there is no current flowing solenoid valve, the standby current of the whole device is lower than 15ma average. While in the working state, while the foot walks, suddenly up To about 100ms, the device that flows under 300ma. Low power consumption even further reduces Joule heating to prevent thermal problems.5. Bed width selection: 3D Touch does not use any light, nor close to (inductor / capacitor) sensors. 3D Touch provides high precision through Hall effect control. Therefore, the bed material can be freely chosen.6. Optimized structure: Larger size. 3D Touch is a technology intensive person. The build size can be set larger than other existing automatic bed level sensors.Specifications:Cable: 3D-touch CableWiring 3Pin: Black ( -, GND)Red (+5V)Blue (control signal)2PIN: Black ( -, GND)Yellow (Zmin)Package List:1 x 3D-touch probe 2 x M2.5 screw 1 x M2.5 nut 1 x 2pin female to female 1m 1 x 3pin female to female 1m 1 x Screwdriver1 x Connection LineNote:Some 3D printer motherboards may have an external 5V power supply if there is insufficient 5V power supply which leads to situation where the probe is difficult to push out, or the logic circuit protects the master restart during operation. If encountered, it is generally recommended to use the DC-DC buck module to draw power from the mains.1.+5V and GND should not be connected for a long time.2. Please try to stay away from strong magnets, motors and fans, etc. with magnetic components3. Accidental impact on the probe aluminum rod may damage or affect the detection accuracy4. Adjusting or reassembling the set screw of the probe requires threading glue5. Install the probe to avoid deformation of the casing6. Pulling the aluminum rod hard will damage or affect the detection accuracy.
| Brand | Unbranded |
|---|---|
| Product ID | 354921056-1007757383 |
| EAN | 5351277279701 |
Please see the product safety information specific to this product outlined below
The following information is provided by the independent third-party retailer selling this product.
Product Safety Labels
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.
| €26.54 | STANDARD: | Estimated delivery date Fri 20 November 2026 ─ Thu 26 November 2026 |
Product is shipped from China.
Alternative shipping methods can be selected at checkout.
Products are shipped by the individual Fruugo retailers, who are located across Europe and the rest of the world. The delivery times and shipping prices vary depending on the retailer's location, the destination country and the selected delivery method.
Fruugo offers two delivery options: Standard Delivery or Express Delivery. All retailers offer a standard delivery service, and some retailers also offer an express delivery service.
- Standard Delivery – Domestic Standard delivery takes approximately 2-5 business days from dispatch, while an International Standard delivery takes 5-14 business days from dispatch. Normally track and trace and proof of delivery are not available on a standard service.
- Express Delivery – Domestic Express delivery takes approximately 1-2 business days from dispatch, while an International Express delivery takes 3-7 business days from dispatch. Usually track and trace and/or proof of delivery are available on an express service.
Although Fruugo retailers endeavour to deliver within these timescales, please note that the above timescales are estimated and not guaranteed.
The delivery timescales do not include any customs clearing times beyond Fruugo's control.
Please allow additional shipping time for deliveries to exceptional locations that are hard to reach, and also during busy periods such as Christmas.
All carriers deliver during normal business working hours and may require a signature on receipt, so please ensure your order is delivered to an address where someone will be available to accept it.
We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items.
Certain products purchased at Fruugo cannot be returned. They fall in the following categories:
- goods which are clearly personalised or made to your specifications
- goods which are liable to deteriorate rapidly, eg fresh fruit, fresh flowers
- sealed goods which are not suitable for return due to health protection or hygiene reasons, if opened, eg make up, underwear, pierced jewellery
- sealed audio or video recordings or computer software, if opened
- newspapers, periodicals and magazines
Please take reasonable care of the goods whilst in your care. Any goods returned must be in a resaleable condition. They must be unworn/unused with original tags attached and in original packaging. It is your responsibility to ensure that the goods are appropriately packaged to ensure they are not damaged in return transit.
Notifying us of a return
If you wish to return an order, or some of the products included in an order, please notify Fruugo customer care within 14 days of receiving the goods, including the following information:
- your name,
- order number,
- the item(s) you wish to return, and
- optionally a reason for your return: unsatisfied with item, item didn't match description, damaged item, wrong item, or some other reason.
Our customer care will send you specific instructions on how to ship the return package(s) to the retailer(s). Please do not ship the return package before you receive the instructions.
Shipping products back to retailers
Goods must be returned without undue delay and in any event not later than 14 days after notifying us of your cancellation.
If you are returning products to several retailers, you should distribute the products accordingly and send the products to those retailers who shipped them to you initially.
We strongly recommend that you use registered mail (and insure any high-value packages), since neither Fruugo nor the retailer take responsibility for shipments that are lost or damaged during return transportation.
Please ensure you retain a proof of postage receipt so in the unlikely event your parcel goes missing, you will have proof you sent it.
Refunds
You will be refunded within 14 days of the retailer receiving back the goods. We will notify you by e-mail once the products reach the retailer and are accepted for return. Where a retailer has offered to collect the goods, you will be refunded within 14 days of cancelling your contract.
Unless a product or products you wish to return arrived to you damaged or faulty, you are responsible for the return transportation costs.
Providing you are returning all the products from a specific retailer, we will refund the standard shipping costs you paid for the original delivery. If you chose to pay for a non-standard delivery, we will only refund the cost of our least expensive, standard delivery.
Damaged or faulty goods
If you receive a damaged, broken, or defective product, please notify Fruugo customer care as soon as possible. Include at least the following information:
- your name,
- order number,
- name of the damaged product(s), and
- state the nature of the damage with attached photograph
We will generally instruct you to ship the damaged product back to the retailer. As soon as it reaches the retailer, they will send you a replacement product. If the replacement can't be made, or if you wish to cancel the order, you will be refunded in full. You will also be reimbursed for reasonable returns postage costs for damaged or faulty goods once we have received your postage receipt.
If the outer packaging of your order is clearly damaged on arrival, and you are suspecting that the products are damaged as well, you can either reject the delivery or accept the goods and sign for them as damaged. In both instances, please notify Fruugo customer care as soon as possible.
Refusing delivery
If you refuse to accept delivery of all or part of your order (where the products or packaging do not appear to be damaged or defective) you will be responsible for the postage charges. Any fees and charges incurred by the retailer due to a package being refused will be deducted from your merchandise refund.
Please see the compliance information specific to this product outlined below.
The following information is provided by the independent third-party retailer selling this product.
Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.
- Wuxishijunchuangdianzikejiyouxiangongsi
- Wuxishijunchuangdianzikejiyouxiangongsi
- dongtingjiedao,zijinglu1-14, xishanqu
- Wuxi
- CN
- 214000
- [email protected]
- 15716205335
Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.
- PROCONSEIL FR
- PROCONSEIL FR
- 8 bis rue Abel
- Paris
- FR
- 75012
- [email protected]
- 780843245